|
Standard
Number
|
Description
|
Notes
|
BAMR
Products
|
Date
|
| BS
EN ISO 11127-6 |
Preparation
of steel substrates before application of paints and related products
- Test methods for non-metallic blast-cleaning abrasives. - Part
6 Determination of water-soluble contaminants by conductivity measurement |
100g
of abrasive and 100ml of water are shaken for 5 minutes, stand for
1h, shaken for 5min and allowed to settle. Fill the cell of a conductivity
meter and measure in millisiemens per metre. |
|
1998
|
| BS
EN ISO 11127-7 |
Preparation
of steel substrates before application of paints and related products
- Test methods for non-metallic blast-cleaning abrasives. - Part
7 Determination of water-soluble chlorides |
100g
of abrasive and 100ml of water are shaken for 5 minutes, stand for
1h, shaken for 5min and allowed to settle. 25ml is titrated with
silver nitrate. |
|
1998
|
| BS
EN ISO 2409 |
Paints
and varnishes - cross-cut test. |
Tool,
1mm for 0-60 mic on hard sub, 2mm for 0-60 mic on soft or 61-120
mic on both hard and soft substrates; soft brush; lens x2 or x3;
adhesive tape 10N/25mm. Use and classification table. |
|
1995
|
| BS
EN ISO 2815 |
Paints
and varnishes - Buchholtz indentation test |
A
sharp wheel indentor loaded with 500+/-5g. The lenth of the indentation
after 30 sec is translated into Indentation Resistance. Same as
BS 3900 - E9: 1976. |
|
1998
|
| BS
EN ISO 8502-2 |
Preparation
of steel surfaces before application of paints and related products
- Tests for the assessment of surface cleanliness - Part 2: Laboratory
determination of chloride on cleaned surfaces |
Assesses
chloride-containing salts present on steel or a coated surface.
A defined area is washed with a known volume of water and the chloride
in it is titrated with mercury nitrate. |
|
1999
|
