SA40 Ultrasonic Wall Material Thickness Gauge TT100 TT130 Elcometer 456 Dry Film Coating Thickness Gauge
BAMR (Pty) Ltd Supplier Coating Thickness Ultrasonic Quality Control Instruments Coating Thickness Elcometer Generator Low Cost Cape Town South Africa Generators Ultrasonic Material Wall Thickness Moisture Fibrescope Fiberscope Endoscopes Laboratory Paint Test Testing Meters Gloss Instrumentation Rhopoint Climatic Condition Measuring Dew Point Humidity RH Temperature Air Surface Liquid Infrared Surface Preparation & Profiles Hardness Inspectors’ Accessories Adhesion Porosity Spark Sponge Pin Hole Concrete Thickness Covermeters Rebar detection Metal Locators Live Cable Detectors to 5m Distance Meters: Ultrasonic Laser Leica Disto Digital Wheel Inclinometers Angle Level Meter Oven Temperature Logger Abrasion Testers Viscometers Ford 4
International Standards : ISO, ASTM, BS, DIN, SABS
Home Page Products Page Support News Web Links Contact Details Index of Products


Elcometer 190
Quick Beton Concrete Cube
Compression Test Mould


Elcometer 190 Quick Beton Concrete Cube Compression Test Mould

Elcometer 190 Quick Beton Concrete Cube Compression Test Mould

Elcometer 190 Quick Beton Concrete Cube Compression Test Mould Technical Specifications

Elcometer 190 Quick Beton Concrete Cube Compression Test Mould Standards

The Elcometer 190 Quick Beton® is an innovative, low cost, accurate cube mould for use in concrete compression and quality testing.

Until now, in order to meet the stringent requirements of UNI EN 12390-1:2002, moulds have usually been solid metal castings - making test sample removal very difficult.

This lightweight (800g) mould is designed to allow samples to be removed with minimal effort. Two modular, identical half-shells are brought together and two side-clips are fixed into place in order to prevent them accidentally separating when the cement mix is poured in.

The Elcometer 190 standardised cube mould is manufactured out of rigid plastic and generates precise cubic test samples of 150mm dimensions.

  • Easy to assemble and breakdown - you do not need any tools for mounting the mould, no compressed air or chemical products to extract the sample - simply slide the side-clips away and remove the concrete cube.

  • Cost & time saving - as the concrete sample manufactured with the Elcometer 190 has all the geometrical and physical specifications required to comply with the dimensional tolerances specified by UNI EN 12390-1:2002, there is no need to grind the surface of the cubes to get the end faces flat and parallel.

  • A fully recyclable product - can be re-used at least 15 times

  • Immediate mould marking - print your test reference information on the cube (concrete manufacturer, project name, etc.) - as early as immediately after pouring.

Each Elcometer 190 is supplied in a kit which contains 6 moulds, 6 side-clip pairs and 2 tamping rods.

Elcometer 181 Mechanical Concrete Test Hammer

Elcometer 181 Mechanical Concrete Test Hammer

Can be used in accordance with:

  • BS 1881

  • UNI EN 12390-1:2002

  • UNI EN 12390-2:2002