Elcometer 207
Elcometer 207DL
Ultrasonic Wall Material Thickness Gauges
Technical Specifications

The Elcometer Ultrasonic Wall / Material Thickness Gauges have a range of features to meet your needs, which include:

Interface-to-Echo Mode: In interface-to-echo mode, the gauge can take readings on thicker plastics and other materials between 1.65mm and 25.4mm (0.065" to 1")

Echo-to-Echo Mode: Measurements can be taken on materials as thin as 0.15mm (0.006 inches). In echo-to-echo mode, the user can take measurements on pre-coated materials without having to remove the coating prior to measurement ie. the gauge ignores the coating thickness.

High Speed Scan Mode: Identifies the minimum thickness point over a large area by moving the transducer over the surface. While the transducer is in contact with the material being measured the smallest value is held in memory and displayed when scanning is complete.

Differential Mode: Displays the positive or negative difference between a pre-set nominal (target) thickness value and the actual measured value.

Alarm Mode: Allows the user to set a target so that an audible and visual alarm operates when taking measurements. If the measurement falls below a pre-set nominal (target) value a red LED will light and the bleeper sounds. A green LED will light to indicate an acceptable thickness.

PLAS* Mode : Specifically for use when measuring thin plastics. Please note that to use this mode, a special Graphite Delay Line must be purchased, Part Number T92016871.

Data Output: Allows the user to send data direct to a printer or PC. Data-logging: A storage capacity of 1000 measurements – 10 files consisting of 100 sequential storage locations. Allows the user to send data direct to a printer or PC.

EDTS+ Excel Link (Elcometer Data Transfer System) : PC data transfer utility including generator of ASCII files and “data drop” add in for Microsoft Excel™ spreadsheets.

EDCS+ (Elcometer Data Collection System) : Stand alone data management program with advance facilities for archiving, reporting, analysis and data export.

Specifications