SA40 Ultrasonic Wall Material Thickness Gauge TT100 TT130 Elcometer 456 Dry Film Coating Thickness Gauge
BAMR (Pty) Ltd Supplier Coating Thickness Ultrasonic Quality Control Instruments Coating Thickness Elcometer Generator Low Cost Cape Town South Africa Generators Ultrasonic Material Wall Thickness Moisture Fibrescope Fiberscope Endoscopes Laboratory Paint Test Testing Meters Gloss Instrumentation Rhopoint Climatic Condition Measuring Dew Point Humidity RH Temperature Air Surface Liquid Infrared Surface Preparation & Profiles Hardness Inspectors’ Accessories Adhesion Porosity Spark Sponge Pin Hole Concrete Thickness Covermeters Rebar detection Metal Locators Live Cable Detectors to 5m Distance Meters: Ultrasonic Laser Leica Disto Digital Wheel Inclinometers Angle Level Meter Oven Temperature Logger Abrasion Testers Viscometers Ford 4
International Standards : ISO, ASTM, BS, DIN, SABS
Home Page Products Page Support News Web Links Contact Details Index of Products


Elcometer 3230 Wet Film Wheel

Elcometer 3230 Wet Film Wheel

Elcometer 3230 Wet Film Wheel

Elcometer 3230 Wet Film Wheel - Technical Specifications

Elcometer 3230 Wet Film Wheel Standards

Elcometer 3230 Wet Film Wheel - Test Method

The Elcometer 3230 Wet film Wheels, formally known as the Elcometer 120 consists of three circles. The central circle is of smaller diameter and is eccentric of the two outer circles. By rolling the gauge through a wet coating, the centre disc eventually touches the film. This point on the scale indicates the thickness.

If the volume to solids ratio of the coating is known, then the wet film thickness can be used to predict the dry film thickness.

Various measurement ranges are available from 0 to 25µm to 0 to 3000µm are available

  • Continuous Scale results in ±5% measurement accuracy

  • Suitable for flat and curved surfaces

  • Stainless steel giving a hard-wearing instrument which can be cleaned with solvents for reuse

See also the Elcometer 3230 Coil Coating Wet Film Wheels

Can be used in accordance with :

  • ISO 2808-7A

  • BS 3900-C5 method 7A

  • ASTM D1212-91 method A

  • NF T30-125