Product Description

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces

The Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces is used to ensure that the chloride has been removed as it is essential that the surface is tested before the coating is applied. Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life of the coating has been reached.

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces test method:

A latex sleeve is filled with a Chlor*Rid extract solution and stuck to the test surface where the solution is worked against the surface to extract the salts. The titration tube is inserted and the results can be recorded.

The Elcometer 134S can be used in accordance with:

  • ISO 8502-5
  • SSPC Guide 15

 

Specifications

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces – Specifications

Part Number Description
E134—-1 Elcometer 134S Salt Detection Kit for Blast Cleaned Surfaces
Measurement Range 1 – 60µg/cm² (1 – 60ppm)
Scale Resolution 1µg/cm² (1ppm)
Tests per kit 4
Storage Conditions Not exceeding 25°C
Weight 250g
Dimensions 185 x 125 x 110mm


Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces Packing list:

4 x test kits each containing:

  • Titration tube snapper
  • Strap
  • Clip
  • Pre-measured bottle of Chlor*Rid extract solution
  • Sleeve
  • Titration tube
  • Operating instructions

Data Sheet

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces – Data Sheet

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces Data Sheet

Standards

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces – Standards

The Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces can be used in accordance with:

  • ISO 8502-5
  • SSPC Guide 15

Test Method

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces Test Method

The Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces is simple and convenient to use with its three-step process

1.    Pour CHLOR*EXTRACT™ solution into the latex tube.

2.    Peel the protective backing off the flange of the tube, pinch to tube to retain the CHLOR*EXTRACT™ and stick the flange to the surface to be tested and work the solution against the surface to extract the salts.

Peel the flange off. Insert the glass titration tube into the solution in the tube and read the results.

Instruction Manual

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces – Instruction Manual

Elcometer 134S Chloride Detection Kit for Blast Cleaned Surfaces Instruction Manual