Product Description

elcometer-1510-conical-mandrel-bend-tester

The Elcometer Conical Mandrel Bend Tester is a mechanical tester used to determine the effects of bending on the elasticity, adhesion and elongation properties of cured coatings on sheet metal.The frame has a bending lever with a roller which pivots on a steel conical mandrel with a diameter from 3.2 – 38.1mm. A graduation indicates the mandrel diameter in both mm and inches.

The specimen can be bent on part of, or along, the entire length of the mandrel, and the results (cracks) corresponding to different test diameters can be observed in a single operation. This is ideal for use in conjunction with the cylindrical mandrel, as it identifies the stop point for more focused testing.

As the instrument is machined out of a solid block of steel, the particularly robust and rigid construction provides excellent resistance to wear and provides long service life. A large, sturdy anodised base, which can be permanently fixed to a workstation, ensures stability during testing.

The Elcometer 1510 Conical Mandrel Bend Tester can be used in accordance with:

  • ISO 6860
  • ASTM D 522-A
  • BS 3900-E11

Standards not in bold have been superseded but are still recognised in some industries.

 

Specifications

Elcometer 1510 Conical Mandrel Bend Tester – Specifications

Part Number Description
K0001510M001 Elcometer 1510 Conical Mandrel Bend Tester
Diameter Range 3.2 – 38.1mm
Sample Size 180 x 100 x 0.8mm
Diemensions 325 x 350 x100mm
Weight 9kg
Certificate available Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.


Elcometer 1510 Conical Mandrel Bend Tester Packing List:

  • Elcometer 1510 Conical Mandrel Bend Tester
  • Operating instructions

Data Sheet

Elcometer 1510 Conical Mandrel Bend Tester – Data Sheet

Elcometer 1510 Conical Mandrel Bend Tester Data Sheet

Standards

Elcometer 1510 Conical Mandrel Bend Tester – Standards

The Elcometer 1510 Bend Tester can be used in accordance with:

  • ISO 6860
  • ASTM D 522-A
  • BS 3900-E11

Standards not in bold have been superseded but are still recognised in some industries.

Instruction Manual

Elcometer 1510 Conical Mandrel Bend Tester – Instruction Manual

Elcometer 1510 Conical Mandrel Bend Tester Instruction Manual