Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge


 

elcometer-ndt-ug20dl-underwater-ultrasonic-thickness-gauge

Product Description

The Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge is an underwater material and coating thickness gauge ideal for offshore inspections.

Waterproof to a depth of 300 metres the Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge offers many features and benefits of the CG100 series in an easy to use brightly lit gauge.

Offering both dual & single element transducers the Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge’s memory allows users to store up to 5,000 individual readings, together with the A-Scan waveform which can be downloaded to the data management software for further analysis on dry land.

 

Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge Advantages

  • 300 metre depth rating
  • Single membrane & dual element probe transducers
  • Automatic probe recognition & zero function
  • Pulse-Echo, Pulse-Echo w/Coating, Echo-Echo and TCG (time corrected gain)
  • Data Storage: Alpha Numeric & Sequential w/ID
  • Data output and storage: 5,000 readings and waveforms or A-Scans
  • Data management software

 

Specifications

Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge – Specifications

 

Model & Part Number UG20DL Underwater Ultrasonic Gauge
Material thickness digits display
Measurement Mode Dual Element: PE, EE (ThruPaint™), PECT
Single Element: Triple-Echo (ThruPaint™)
Measurement Rate
Manual: 4 readings per second
Measurement Range PE: 0.63 – 500mm
EE: 2.54 – 102mm
PECT: 0.63 – 500mm
PECT: 10.0 – 254μm
Triple: 1.00 – 150mm
Measurement Accuracy ±0.01mm
Measurement Resolution 0.01mm
Velocity Calibration Range 1250 – 13,995m/s
Additional Features:
    A-Scan stored in memory with each reading for review on PC
    Calibration setups 1 user programmable & 8 pre-calibrated velocities for:
aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steel
    Waterproof – depth ratings maximum depth 300 metres – equivalent to IP68
Pulser type dual square wave pulsers
Gain time corrected gain (TCG), automatic gain control (AGC) with 100dB range,
or selectable gain: vlow, low, medium hi or vhi
Timing precision 25MHz TCXO with single shot
100MHz 8bit ultra low power 8 bit digitizer
Data logging • 5,000 with A-scan image & gauge settings in one batch
• sequential and grid logging
• alpha numeric batch identification
Calibration Options velocity & material type
Transducer Probe Type dual and single element
Transducer Frequency Range 1 – 10MHz
Transducer recognition custom automatic (dual transducers) & manual – selectable from a list
V-path / dual path error correction automatic
Probe Zero automatic (dual transducers) & manual (via integrated probe disk)
Display 12.7mm 4.5 digit LCD
Display Refresh Rate 25Hz
Units (selectable) mm or inches
Backlight on / off / auto
Repeatability / Stability Indicator
Battery Type 3 x AA alkaline
Battery Life (approximate) 50 hours (15 hours with backlight on)
Low Battery Indicator
Battery Save Mode auto
Operating Temperature -30 to 60ºC
Size (length x diameter) 229.0 x 60.33mm
Weight (including batteries) 680g
Case design high strength transparent plastic housing with
single, magnetically coupled, multifunction switch
Transducer connctor type LEMO underwater connectors
RS232 Interface Bi-directional


Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge Packing List:

  • Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge
  • Couplant
  • Carry case
  • User manual
  • Test certificate
  • 3 x AA batteries
  • Software
  • Transfer Cable
  • Spare Gaskets
  • Lubrication Set

 

Data Sheet

Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge – Data Sheet

Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge Data Sheet

Instruction Manual

Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge – Instruction Manual

Elcometer NDT UG20DL Underwater Ultrasonic Thickness Gauge Instruction Manual