SA40 Ultrasonic Wall Material Thickness Gauge TT100 TT130 Elcometer 456 Dry Film Coating Thickness Gauge
BAMR (Pty) Ltd Supplier Coating Thickness Ultrasonic Quality Control Instruments Coating Thickness Elcometer Generator Low Cost Cape Town South Africa Generators Ultrasonic Material Wall Thickness Moisture Fibrescope Fiberscope Endoscopes Laboratory Paint Test Testing Meters Gloss Instrumentation Rhopoint Climatic Condition Measuring Dew Point Humidity RH Temperature Air Surface Liquid Infrared Surface Preparation & Profiles Hardness Inspectors’ Accessories Adhesion Porosity Spark Sponge Pin Hole Concrete Thickness Covermeters Rebar detection Metal Locators Live Cable Detectors to 5m Distance Meters: Ultrasonic Laser Leica Disto Digital Wheel Inclinometers Angle Level Meter Oven Temperature Logger Abrasion Testers Viscometers Ford 4
International Standards : ISO, ASTM, BS, DIN, SABS
Home Page Products Page Support News Web Links Contact Details Index of Products

TH130
Integrated Portable Hardness Tester
Technical Specifications

Size 150 x 22 x 53mm
   
Impact device D
   
Impact energy 11Nmm
   
Test tip Tungsten Carbide
   
Average No. of Readings 60 000 to 70 000 readings
   
Measuring accuracy mean uncertainty +/- 0.8%
   
Weight 130g
   
Operating time 8 hours continuous use / rechargeable
   
Impact direction any angle
   
Operating temperature 0 °C to + 50 °C
   
Min. weight of sample 5kg
   
Min. thickness of sample 5mm
   
Min. thickness of layers 0.8mm
   
Min. radius of curved surface 30mm

Coupling paste is available for testing thin or small parts weighing less than 2kg

Materials & Measuring Range TH130 (HL:200-900)

Material
HL
HRC
HRB
HRA
HB
HV
HS
 
Steel & cast steel
200-900
20-68
60-100
59-86
93-674
83-976
32-100
 
Cold work tool st.
20-67
-
-
80-898
 
Stainless steel
20-62
46-100
85-655
85-802
 
Grey cast iron
-
-
93-334
 
Nodular cast iron
-
-
131-387
 
Cast aluminium alloys
-
-
27-159
 
Copper/Zinc alloys (brass)
-
13-95
40-173
 
CuAl/CuSn alloys (bronze)
-
-
60-290
 
Wraught copper alloys
-
-
45-315
 

Support Rings

On curved surfaces having a radius of under 30mm, effective positioning on the workpiece is facilitated by the use of the support ring (set of 7) .The appropriate support ring is screwed on to the end of the impact device in place of the standard flat support ring. The set includes support rings suitable for bar / tube and grooves up to a radius of 11mm.

Special support rings for convex or concave surface can be manufactured.

TH130 comes complete with a testblock, plastic case, charger and instruction manual

Standard delivery

•  Processor integrated with impact device D

  • Test block with HLD-valve
  • Battery charger
  • Cleaning brush
  • Carrying case
  • Time certificate
  • Manual
  • Guarantee Card

TH130 Integrated Portable Hardness Tester