SA40 Ultrasonic Wall Material Thickness Gauge TT100 TT130 Elcometer 456 Dry Film Coating Thickness Gauge
BAMR (Pty) Ltd Supplier Coating Thickness Ultrasonic Quality Control Instruments Coating Thickness Elcometer Generator Low Cost Cape Town South Africa Generators Ultrasonic Material Wall Thickness Moisture Fibrescope Fiberscope Endoscopes Laboratory Paint Test Testing Meters Gloss Instrumentation Rhopoint Climatic Condition Measuring Dew Point Humidity RH Temperature Air Surface Liquid Infrared Surface Preparation & Profiles Hardness Inspectors’ Accessories Adhesion Porosity Spark Sponge Pin Hole Concrete Thickness Covermeters Rebar detection Metal Locators Live Cable Detectors to 5m Distance Meters: Ultrasonic Laser Leica Disto Digital Wheel Inclinometers Angle Level Meter Oven Temperature Logger Abrasion Testers Viscometers Ford 4
International Standards : ISO, ASTM, BS, DIN, SABS
Home Page Products Page Support News Web Links Contact Details Index of Products


DM4A Non Destructive Moisture Meter

DM4A Non - Destructive Moisture Meter

DM4A Non - Destructive Moisture Meter

DM4A Moisture Meter - Technical Specifications

Universal moisture meter for measuring moisture content in wood, building materials, paper, cardboards and numerous other materials

Conforms to: DIN EN.50081 & 2 (EC Rated)

No damage to materials. Only put on and read !

Features

The pocket size, robust, hand held, electronic moisture meter is suitable for a quick determination of the moisture. The materials are merely touched and the % moisture appears on the display. (approximately one reading every 2 seconds)

The depth of penetration of the measuring field into the material is approximately 30 mm, thereby the moisture in low lying layers is obtained as well. The average moisture % is shown.

Time consuming preparations (ie drilling holes & waiting for heat to dissipate) are no longer required.

Supplied in foam lined pouch with instructions

Other features include

  • material group setting by means of a membrane-type keypad

  • the adjusted material group can always be seen in the display

  • microprocessor controlled measuring with automatic zero point correction

  • up to 10 different customer specific linearisation curves, with up to 8 free programmable linearisation points can be implemented

  • storage for 100 moisture values

  • automatic calculation of maximum, average and minimum value

  • fixed linearisation curves for a lot of common materials are already stored and can be selected

  • the instrument's calibration can be checked with the optional calibration modules PE05 and PE30

 

Optional Extras

  • Software DMI-Controller which includes RS232 serial interface cable for connecting to a PC

  • different settings can be chosen and measured and stored. These values can then be transferred to the PC for analysis and storing on a disc.

  • the instrument can be made with an aluminium casing for better protection against mechanical and electrostatic influence