|
Measure Mode : |
Search Mode : |
Measurement Range : |
6% to well above fibre saturation in wood |
Relative, colour-coded |
|
and beyond (to nominal 1000) |
|
Depth : |
10mm with Pins / up to 140 or more with Deep Wall Probe |
up to 15 cm |
Calibration : |
Wood moisture equivalent |
Relative |
Resolution : |
LCD +/- 0.1% |
Not applicable |
Operating Temp Range : |
-10 to 45 deg C |
|
Display : |
Three-digit LCD and synchronised green, |
Green, yellow and red LED's |
|
yellow and red LED display |
|
Audible Alarm : |
Search Mode only - adjustable synchronised with LED display |
Instrument size & weight : |
165 x 52 x 40 mm; 200g |
|
Powered by : |
Two LR6 batteries |
|
Accessories
Whilst in the measure mode the meter can be used with: A two-pin remote probe and lead is included for awkward corners and under work surfaces.
A set of ‘Deep Wall Probes ' that are insulated but for their tips providing quantitative WME readings at depth, regardless of surface dampness and surface contamination by salts.
An optional Hammer Electrode ( BLD5000 ) for quick and easy measurement at depth of the moisture content of timber.
The instrument is supplied with pouch, moisture probe, deep wall probes, ‘calcheck' and wood calibration table.
|
