Buy it online here TH5100 Integrated Portable Digital Hardness Tester, previously TH170, is an advanced integrated digital hardness tester distinguished by its compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry. The TH5100 combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers, Brinell, Rockwell, or Shore hardness values. The impact direction … Read More
Measuring a coating’s hardness using the indentation method, the Elcometer 3095 Buchholz Hardness Tester consists of a bevelled disc indenting tool which is fitted into a stainless steel block exerting a constant test load of 500g. The gauge is places on to the coating for 30 seconds and the length of any subsequent indentation in the coating is measured using the graduated microscope.
The Elcometer 3025 Scratch Tester is a motorised device to test the resistance of many materials to scratching, shearing, gouging, marring, scraping and engraving. This portable instrument tests materials up to 12.7mm thick by 101mm square or round. The height of the scale beam is adjusted by the user to match the thickness of the sample. The tool, a conical diamond tip, is then placed on the sample and the instrument is activated by the user with the On/Off switch.
The Elcometer 3000 Clemen Hardness Tester is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.A tool is fitted with an hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually on to the sample surface which is then pulled linearly 60mm (2.36”). Depending on the load applied, varying degrees of penetration of the tool into the coating are observed – from a superficial trace to total destruction.
The Elcometer 3092 Sclerometer Hardness Tester tests the hardness of a coating by moving a Tungsten Carbide Tip over the coating with predetermined force. The body of the instrument contains a cursor fitted with a screw lock and a round tip, compressed by one of the four springs corresponding to the four printed scales: Grey spring: 0-3N (0.671lbF) Red spring: 0-10N (2.248lbF) Blue spring: 0-20N (4.49lbF) Green spring: 0-30N (6.74lbF)
The Elcometer 181 Mechanical Concrete Test Hammer provides a quick, simple and inexpensive method for non-destructive evaluation of concrete and other masonry materials. Concrete test hammers are one of the most widely used instruments in the field of non-destructive testing, and Elcometer can offer you mechanical or digital models.
Knowledge of the moisture content of soils and construction materials is of great importance to engineers involved with the construction of roads, bridges and other civil structures. Throughout the world, the Speedy Ashworth Calcium Carbide Moisture Meter is used on construction sites to establish the percent moisture content (%MC) of these materials before the actual construction work commences. The Speedy Ashworth Calcium Carbide Moisture Meter is a portable-sampling instrument used to determine the moisture content of a broad range of materials. … Read More