The Elcometer 138/2 Surface Contamination Kit, provides a quick and easy method of measuring surface contaminants. It comes supplied with test strips to measure: pH Iron (ferrous ion) Chloride Salt Measuring the level of contaminants on a surface prior to application of the coating is essential to ensure the quality of the coating, and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and … Read More
It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. The Elcometer 138 Bresle Kit includes the Elcometer 138 Conductivity Meter. This lightweight, portable conductivity meter accurately measures the salinity of … Read More
Designed to accurately measure surface chloride, sulphate and nitrate ions in minutes. The Elcometer 134 CSN – Chlorides, Sulphates & Nitrates ‘CSN Salts’ kit offers a single kit solution for testing in the field. All the components of the Elcometer CSN Test Kits are pre-measured and pre-dosed for trouble free testing. Results are recorded in parts per million (ppm) requiring no complicated calculations. Elcometer 134 CSN tests are all designed to use a ratio of 1:1 for easy conversation to … Read More
If the chloride levels in the wash water are too high, it will promote premature corrosion, shortening the life of both steel and concrete structures. The Elcometer 134W Chloride Ion Test Kit for Water / Liquids is used to monitor recycled water (after it has been applied) to establish effectiveness of salt removal, this test is ideal when mixing concrete and when washing steel.
The Elcometer 134S Chlor Test for Blast Cleaned Surfaces allows the surface to be tested for chloride salts prior to application of a coating. Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life of the coating has been reached. To ensure that the chloride has been removed it is essential that the surface is tested before the coating is … Read More
Using the Elcometer 134A Chloride Ion Test Kit for Abrasives in the field will accurately identify contamination and prevent costly surface-related failures. Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely. Contamination can build up, particularly if the blast media is recycled several times.
The Soluble Salt Meter (SSM) Salt Contamination Meter is developed specifically to address problems with US Navy and IMO test protocols using the Bresle Patch. The SSM exactly duplicates the Bresle Patch process but with a higher accuracy and reproducibility. Measurements are automated and there are no consumables. The complete test sequence requires less than a minute. In comparison to the Bresle Patch the Soluble Salt Meter (SSM) Salt Contamination Meter : cuts sampling and inspection time low costs per … Read More
Features Fast reading rate allows multiple tests to be completed efficiently Pressure plate ensures a constant and uniform pressure to paper Automatic detection of paper size and automatic adjustment of reading value USB and Bluetooth® data output to ElcoMaster™ 2.0 software Dust and water resistant rugged design equivalent to IP64 Automatic temperature compensation ensures accurate results Non-oxidising gold plated contacts ensures lifetime accuracy Stores up to 150,000 readings in 2,500 alpha numeric batches Fully portable hand-held, ergonomic design ideal for … Read More
The Elcometer 119 Pipe Pit Gauge is a small pocket sized gauge designed to identify the condition of a pipe. The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit. The gauge shows the pit depth compared to with the nominal pipe wall thickness.
Elcometer 125 Surface Comparators These extremely durable comparators allow the estimation of surface roughness of either grit and shot blasted surfaces. Using the Elcometer 125 Surface Comparators as a reference, the blasted profile can be compared to the four reference profile grades in each comparator. Profiles are recorded in microns. 4 Roughness Values per Comparator