Product Description
The Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups is a stainless steel or anodised aluminium precision instrument for determining the specific weight of paints and similar products. This instrument consists of a cylindrical container and cover with a hole for exhaust of tested liquid excess.These can be supplied with or without a tare weight for weighing on a balance.
As the Specific Gravity Cup is an exact measurement of the volume of the liquid, it is imperative that the exact weight of the sample is obtained. Elcometer offers a range of cups and laboratory balances for accurate measurements during the development of a coating. How to use a Density Cup:
*Note that each Cup has an escape hole in the lid to allow excess liquid to escape. Any excess liquid should be removed before weighing. The Elcometer 1800 Densimeter Picnometer Specific Gravity Cups can be used in accordance with:
The standards not in bold have been superseded but are still recognised in some industries. |
Specifications
Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups – Specifications
Part Number | Description | Capacity |
K0001800M003 | Elcometer 1800/3 Density Cup aluminium | 50cc |
K0001800M004 | Elcometer 1800/4 Density Cup aluminium with calibration certificate | 50cc |
K0001800M007 | Elcometer 1800/7 Density Cup aluminium | 100cc |
K0001800M008 | Elcometer 1800/8 Density Cup aluminium with calibration certificate | 100cc |
Certificate available | Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. | |
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory. |
Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups Packing List:
- Elcometer 1800 Aluminium Cup
- Tare weight (if ordered)
- Storage case
- Operating instructions
Data Sheet
Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups – Data Sheet
Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups Data Sheet
Standards
Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups – Standards
The Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups can be used in accordance with:
- ISO 2811-1
- ASTM D 891-B
- ASTM D 1475
- DIN 53217-2
- FTMS 141 4183
- NBN T22-110
- NFT 30-020
The standards not in bold have been superseded but are still recognised in some industries.
Accessories
Elcometer 1800 Densimeter / Picnometer / Specific Gravity Cups – Accessories
Part Number | Description |
Tare-counterweight for Picnometer | KT001800N001 |
Calibration Certificate | KCAL9960P047 |