Elcometer 355 Probe Range

Product Description


Unique probe modules allow the Elcometer 355 Coating Thickness Gauge to be versatile and flexible for any coating thickness measurement application.
Probe modules can be freely interchanged as required for both ferrous (F) and non-ferrous (N) metal substrates.

Most coating thickness gauge probes are capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces.

Telescopic probes extend from 410mm to 1100mm.

Specifications

Scale 1Range:0-1500μmAccuracy*: ±1% or ±1μm 
 Resolution:0.1μm: 0-200μm; 0.5μm: 200-500μm; 1μm: 500-1500µm 
 
 StandardRight AngleTelescopicN1 Standard
Probe DesignPart NumberMinimum HeadroomMinimum Sample DiameterCertificate
F1 StandardT3551195285mm6mm
F1 TelescopicT3551195930mm6mm
N1 StandardT3551198285mm8mm
     
Scale 2Range:0-5mmAccuracy*: ±1% or ±5μm 
 Resolution:2μm: 0-500μm; 5μm: 500-5000μm 
  
 F2 StandardF2 TelescopicN2 Standard 
     
Probe DesignPart NumberMinimum HeadroomMinimum Sample DiameterCertificate
F2 TelescopicT3551196036mm10mm
N2 StandardT3551198488mm18mm
     
Scale 4Range:0-250µmAccuracy*: ±1% or ±1μm 
 Resolution:0.1µm: 0-250µm  
  
 F4 StandardF4 Right Angle (long)N4 Standard 
     
Probe DesignPart Number Minimum Headroom Minimum Sample Diameter Certificate 
F4 StandardT3551195085mm4mm
F4 Right Angle (long)T3551195118mm3mm
N4 StandardT3551198090mm8mm
     
Scale 5Range:0-250µmAccuracy*: ±1% or ±1μm 
 Resolution:0.1µm: 0-250µm  
    
 F5 Rebar   
     
Probe DesignPart NumberMinimum HeadroomMinimum Sample DiameterCertificate
F5 (Rebar)T3551196285mm4mm

Data Sheet

Elcometer 355 Probe Range – Data Sheet

Elcometer 355 Probe Range Data Sheet

Accessories

Jumbo Hand Grip
Ideal for precision placement for the most accurate results on flat and curved surfaces. Place the probe inside the Jumbo Hand Grip and take measurements – ideal when wearing gloves.
 
T9997766 – Jumbo Hand Grip – F and N Probes
 
For use with the following Elcometer 355 probes:
F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard
  
V-Probe Adaptor
Ideal for precision placement for the most accurate results on medium and large diameter curved surfaces such as pipes and cylinders.
 
T9997381 – V-Probe Adaptor – F and N Probes
 
For use with the following Elcometer 355 probes:
F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard
  
Probe Placement Jig
For the most reliable and repeatable coating thickness measurements, making the gauge score highly in repeatability and reproducibility studies. Ideal for small and large components alike. The probe placement jig is supplied with a probe housing to suit standard F1, F2, F4, F5 and N1 probes. Housings to suit other probes are available as optional accessories.
 
T95012880 – Probe Placement Jig
T95013028 – Component Hand Vice
T95012888 – Cable Release Assembly – ideal for remote measurements
T95015589 – N4 Probe Adaptor – must be purchased for use with N4 Probes