Shop online
BEVS 3236U Auto Panel Spray Station features a fully automated spray-gun system combined with a no-clean paint cup design. This configuration not only enables small-volume coating application and rapid paint sample changeover, but also allows the spray gun to be cleaned automatically while the paint cup requires no cleaning at all.
The sealed and controllable "spray station" chamber makes the BEVS 3236U highly suitable for use in production workshops, laboratories, and other environments requiring clean, consistent, and repeatable spray-coating operations.
With one-touch start, the BEVS 3236U automatically completes the spraying process according to the preset program. The X, Y, and Z axes are fully controlled to handle sample panels of various sizes.
The BEVS 3236U Auto Panel Spray Station provides fully automatic control of atomising air pressure, fan air pressure, and coating flow/pressure, enabling precise and consistent application of panels with different and uniform film thicknesses.
BEVS 3236U Auto Panel Spray Station
An automatic panel spray station that sprays test panels in a sealed spray chamber, following a preset program started with one touch. The X, Y and Z axes are fully controlled, with automatic control of atomising air pressure, fan air pressure and coating flow. It sprays up to 200 x 300 mm, or four standard 150 x 100 mm panels, to ASTM D823/A.
- Quick-change spray gun system with automatic cleaning.
- 7-inch high-resolution touchscreen interface.
- Intelligent programmable spraying process.
- Fully automated three-axis spraying.
- Bidirectional spraying capability.
- Automatic adjustment of spray-head height relative to the panel.
- Automatic control of spray pattern width, atomising air pressure, and coating flow/pressure.
- No-clean paint cup design.
- Fast sample spraying.
When to use the BEVS 3236U Auto Panel Spray Station
Choose the BEVS 3236U when you need small batches of uniformly sprayed test panels, with frequent paint changes, in a sealed spray chamber.
- 1Uniform, repeatable test panels to ASTM D823/AThe BEVS 3236U sprays panels automatically to a preset program, with the X, Y and Z axes and the atomising, fan and coating flow pressures all under automatic control. Every panel in a series gets the same treatment, which hand spraying cannot promise when panels are being compared to ASTM D823/A or GB 1727-92.
- 2Frequent colour or paint changes, in small quantitiesThe BEVS 3236U combines a no-clean paint cup with a spray gun that is cleaned automatically, which the datasheet says enables small-volume coating application and rapid paint sample changeover. A lab spraying many different samples in a day does not lose time cleaning between each one.
- 3Spraying in a workshop or lab without a separate spray boothThe BEVS 3236U is a sealed and controllable spray chamber: panels are sprayed inside the cabinet, behind a door, and BEVS describe it as suitable for production workshops, laboratories and other environments requiring clean, consistent spray-coating. Our BEVS 1829 EXP sprayer lists a water curtain cabinet as a separate option to collect the overspray. Note that the 1 kW power figure excludes the exhaust/negative-pressure fan, and the exhaust air volume is approx. 1500 m3/h, so it still needs extraction.
- 4Small batches of up to four panelsThe BEVS 3236U sprays a maximum of 200 x 300 mm, or 4 standard 150 x 100 mm panels, per run. For bigger batches, the BEVS 1826 sprays up to 9 standard panels (300 x 450 mm), and the BEVS 1829 EXP sprays up to 6 (300 x 300 mm) and is explosion-proof.
Other BEVS panel sprayers
Ten minutes on a call with one of our specialists usually saves you from buying the wrong instrument.
Book a 10-minute callOr , our product assistant, for an instant answer.
When to use this
When to use the BEVS 3236U Auto Panel Spray Station
Choose the BEVS 3236U when you need small batches of uniformly sprayed test panels, with frequent paint changes, in a sealed spray chamber.
- 1Uniform, repeatable test panels to ASTM D823/AThe BEVS 3236U sprays panels automatically to a preset program, with the X, Y and Z axes and the atomising, fan and coating flow pressures all under automatic control. Every panel in a series gets the same treatment, which hand spraying cannot promise when panels are being compared to ASTM D823/A or GB 1727-92.
- 2Frequent colour or paint changes, in small quantitiesThe BEVS 3236U combines a no-clean paint cup with a spray gun that is cleaned automatically, which the datasheet says enables small-volume coating application and rapid paint sample changeover. A lab spraying many different samples in a day does not lose time cleaning between each one.
- 3Spraying in a workshop or lab without a separate spray boothThe BEVS 3236U is a sealed and controllable spray chamber: panels are sprayed inside the cabinet, behind a door, and BEVS describe it as suitable for production workshops, laboratories and other environments requiring clean, consistent spray-coating. Our BEVS 1829 EXP sprayer lists a water curtain cabinet as a separate option to collect the overspray. Note that the 1 kW power figure excludes the exhaust/negative-pressure fan, and the exhaust air volume is approx. 1500 m3/h, so it still needs extraction.
- 4Small batches of up to four panelsThe BEVS 3236U sprays a maximum of 200 x 300 mm, or 4 standard 150 x 100 mm panels, per run. For bigger batches, the BEVS 1826 sprays up to 9 standard panels (300 x 450 mm), and the BEVS 1829 EXP sprays up to 6 (300 x 300 mm) and is explosion-proof.
Other BEVS panel sprayers
Ten minutes on a call with one of our specialists usually saves you from buying the wrong instrument.
Book a 10-minute callOr , our product assistant, for an instant answer.
Specifications
Technical parameters
- Panel movement speed
- X-axis: 10 to 600 mm/s. Y-axis: 10 to 100 mm/s
- Spray gun distance (gun-to-panel)
- 150 to 250 mm
- Atomising pressure
- 0.1 to 0.6 MPa
- Fan (spray pattern) pressure
- 0.1 to 0.6 MPa
- Coating flow pressure
- 0.01 to 0.2 MPa
- System air supply pressure
- 0.7 MPa
- Spraying area
- Max 200 x 300 mm, or 4 standard panels (150 x 100 mm each)
- Equipment dimensions
- (L) 1000 x (W) 900 x (H) 2300 mm
- Power consumption
- 1 kW (excluding exhaust/negative-pressure fan)
- Spray station weight
- 350 kg
- Exhaust air volume
- Approx. 1500 m3/h
Conforms to
Conforms to
Downloads
Frequently asked questions
What does the BEVS 3236U Auto Panel Spray Station do?
It sprays test panels automatically in a sealed spray chamber, following a preset program started with one touch. The X, Y and Z axes are fully controlled to handle sample panels of various sizes, and atomising air pressure, fan air pressure and coating flow/pressure are all controlled automatically.
How many panels can the BEVS 3236U spray at once?
The BEVS 3236U has a maximum spraying area of 200 x 300 mm, or 4 standard panels of 150 x 100 mm each.
Which standards does the BEVS 3236U support?
ASTM D823/A, Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels, and GB 1727-92, General preparation of paint film.
Does the spray gun or paint cup need cleaning between samples?
The spray gun is cleaned automatically, and the paint cup is a no-clean design that requires no cleaning at all. According to the datasheet, this enables small-volume coating application and rapid paint sample changeover.
What air supply and extraction does the BEVS 3236U need?
A system air supply pressure of 0.7 MPa and an exhaust air volume of approx. 1500 m3/h. Power consumption is 1 kW, excluding the exhaust/negative-pressure fan.
How big and heavy is the BEVS 3236U?
The BEVS 3236U Auto Panel Spray Station measures (L) 1000 x (W) 900 x (H) 2300 mm and weighs 350 kg.
Related products
Quote on the BEVS 3236U Auto Panel Spray Station by close of business.
Tell us about your application and we will send a quote with lead time and accessories.
Not sure this is the right model for your job? for a quick recommendation.
Request a quote
Request a quote
Tell us about your application and we will send a quote with lead time and accessories.