Concrete Inspection Accessories

Home » Products » Concrete Testing » Concrete Inspection Accessories

Concrete Inspection Accessories like mirrors can be used during inspection. Sometimes the substrate or coating requires closer investigation. In dark or shaded areas, further investigation may require additional light. It may be necessary to take a detailed look at a specific area where you cannot get to. In this case an inspection mirror is required. For close up investigations the inspector may require magnification of the surface for a clearer understanding.

A simple range of gauges used for the measurement of crack widths in concrete and other structures is also included.

The Elcometer 143 Crack Width Ruler is similar in size to a standard credit card, this transparent gauge is marked with a range of graded lines. This simple gauge has been designed to provide inspectors with a low cost alternative to a graduated microscope for determining the width of a crack in concrete or other building materials. Each line is a specified width.To use, position the gauge over the crack and identify which line is a similar width to the crack. Read off the width value.
The Elcometer 143 is probably the most popular method of quickly determining the crack width due to its pocket size and competitive pricing. Users of the ruler vary widely from the less sophisticated user who just wants a quick and easy indication to the more sophisticated user who wants a more accurate result.

The Elcometer 131 Inspection Mirrors are ideal for inspecting difficult to access areas – inside pipes, behind corners, underneath inspection tanks, and other inaccessible or awkward areas. Combined with the full range of test equipment from Elcometer, these high quality, robust mirrors help to provide a detailed examination of the component or project under inspection.

Many environments can have low light or dark areas and explosive gas present; ballast tanks, oil and gas tanks, etc. It is imperative, not only for safety reasons, but also to be able to inspect the coating adequately, to have sufficient light. The Elcometer 132 Safety Torch / Flash Light is explosion proof and meets the ATEX directive as category 2 equipment. It is approved to the latest EN Standards for electrical apparatus for potential explosive atmospheres. This allows for use in Group II applications zones 1 and 2, IIA and IIB gases, where T4 temperature class permits.

Concrete Inspection Accessories Elcometer 143 Crack Width Ruler

Concrete Inspection Accessories Elcometer 131 Inspection Mirrors

Concrete Inspection Accessories Elcometer 132 Safety Torch / Flash Light (Intrinsically Safe)

14 Jun 2021

HT225D Digital Concrete Test Hammer

by Graham Duk | posted in: Concrete Inspection Accessories, Hardness - Concrete Testers, Hardness Testers | 0

HT-225D is an integrated digital concrete test hammer which combines a data processor and a test hammer into one unit. It is widely used for non-destructive testing the quality of concrete and building materials in a finished structure or in prefabricated blocks. From its rebound value, the compressive strength of concrete can be calculated automatically. All testing data can be stored in the memory and transferred to a PC using a USB cable or wireless via Bluetooth. Features of the … Read More

9 Apr 2015

Elcometer 132 Safety Torch / Flash Light (Intrinsically Safe)

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Inspection Accessories, Inspectors Accessories - Other, Products | 0

Many environments can have low light or dark areas and explosive gas present; ballast tanks, oil and gas tanks, etc. It is imperative, not only for safety reasons, but also to be able to inspect the coating adequately, to have sufficient light. The Elcometer 132 Safety Torch / Flash Light is explosion proof and meets the ATEX directive as category 2 equipment. It is approved to the latest EN Standards for electrical apparatus for potential explosive atmospheres. This allows for … Read More

8 Apr 2015

Elcometer 143 Crack Width Ruler

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Inspection Accessories, Inspectors Accessories - Other, Products | 0

Buy it online here The Elcometer 143 Crack Width Ruler is similar in size to a standard credit card, this transparent gauge is marked with a range of graded lines. This simple gauge has been designed to provide inspectors with a low cost alternative to a graduated microscope for determining the width of a crack in concrete or other building materials. Each line is a specified width. To use, position the gauge over the crack and identify which line is a … Read More

8 Apr 2015

Elcometer 7210 Pocket (x30) Microscope

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Inspection Accessories, Magnifiers & Microscopes, Products | 0

The Elcometer 7210 Pocket (x30) Microscope is pocked size and an extremely practical microscope for site inspections. Having x30 magnification and a built-in light source, the Elcometer 7210 Pocket Microscope is the ideal choice for close up investigation of coating defects and surface cleanliness.

8 Apr 2015

Elcometer 900 Concrete Crack Microscope

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Magnifiers & Microscopes, Products | 0

The Elcometer 900 Concrete Crack Microscope is a very simple, graduated x50 microscope with internal illumination. This allows the user to quickly determine width by counting the number of graduated reticules on the scaled lens and calculating the value.

8 Apr 2015

Elcometer 137 Illuminated Magnifier

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Inspection Accessories, Magnifiers & Microscopes, Products | 0

The Elcometer 137 Illuminated Magnifier is a popular well priced quality product used for assessing the characteristics of a surface. From time to time a closer inspection of a surface is required to ascertain the exact conditions of the material’s profile, cleanliness etc. Furthermore, many environments can be in low light or dark areas – ballast tanks, oil and gas tanks, etc. The Elcometer 137 Illuminated Magnifier is the ideal product for the job. Lightweight, battery powered, portable magnifier Ideal for … Read More

8 Apr 2015

Elcometer 131 Inspection Mirrors

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Inspection Accessories, Magnifiers & Microscopes, Products | 0

The Elcometer 131 Inspection Mirrors are ideal for inspecting difficult to access areas – inside pipes, behind corners, underneath inspection tanks, and other inaccessible or awkward areas. Combined with the full range of test equipment from Elcometer, these high quality, robust mirrors help to provide a detailed examination of the component or project under inspection.

8 Apr 2015

139 Illuminated Pocket Microscope – 30X and 100X Zoom

by Graham Duk | posted in: Coating Inspection, Concrete Inspection Accessories, Concrete Testing, Inspection Accessories, Magnifiers & Microscopes, Products | 0

The perfect pocket microscope with built-in illumination. Useful for observing the finest details which cannot be seen with the naked eye. The focusing wheel can be easily adjusted to obtain sharpened vision through the precision lens. These microscopes are Patented in the USA & Canada and have a “rotatable direct light source” to pinpoint the light on the object, and is CE Rated. Applications Ideal for Paint & Corrosion Inspectors, Consultants, Mechanical, Civil & Electrical Engineers, Scientists & Inspectors. Also, … Read More