The MontiPower Electric Bristle Blaster is a mains-powered surface preparation tool that removes corrosion and generates an anchor profile at the same time using a rotary bristle belt. Before a protective coating goes on, steel has to be cleaned of rust and given a key for the coating to grip, and Bristle Blasting does both in one operation, producing a texture and visual cleanliness that mimics traditional grit blasting.
The bristle tips strike the corroded surface with kinetic energy equivalent to standard grit blast media, then rebound from the surface. This combination removes corrosion and creates a micro-indentation that exposes fresh metal. The MontiPower Electric Bristle Blaster runs without vibration or jumping, which reduces operator fatigue, and leaves only minimal adhesive residue that can be removed with a suitable solvent. It cuts labour by more than 60% compared with conventional methods.
The MontiPower Electric Bristle Blaster runs on 230 V at 50 Hz with a maximal output of 700 W and a nominal output of 480 W, an idle speed of 3,200 rpm and a vibration figure of 2.8 m/sec2. The MontiPower Electric Bristle Blaster measures 400 x 100 mm and 180 mm high including the handle, weighs 2.2 kg, takes a 110 mm outer belt and runs at 83 dB(A). It suits surface preparation in coatings and corrosion protection work, and is supplied by BAMR, South Africa's authorised distributor.
MontiPower Electric Bristle Blaster
Bristle Blasting technology simultaneously removes corrosion and generates anchor profile. The bristle tips are designed to strike the corroded surface with kinetic energy that is equivalent to standard processes that use grit blast media.
- No vibration or jumping reducing operating fatigue
- Minimal adhesive residue can be easily removed with suitable solvent
- Fast, easy operation cuts labour by more than 60%
Also available to buy online at GaugeIt, our online store.
When to use the Electric Bristle Blaster
Use the Electric Bristle Blaster where mains power is at hand and you need to remove corrosion and create an anchor profile in a single step. The bristle tips strike the surface with kinetic energy comparable to standard grit blast processes, making it a fit for spot repairs and coating preparation without setting up blast media.
- 1One-step clean and profileIt removes corrosion and generates the anchor profile at the same time, so a coating crew can prepare and recoat without a separate profiling stage.
- 2Cuts labour by 60%Fast, easy operation cuts labour by more than 60 percent, which matters on repair work where setup and dwell time drive the cost.
- 3Low vibration handlingNo vibration or jumping reduces operator fatigue, helping an applicator hold the tool steady through a longer shift.
Lower-budget alternatives
Ten minutes on a call with one of our specialists usually saves you from buying the wrong instrument.
Book a 10-minute callOr , our product assistant, for an instant answer.
When to use this
When to use the Electric Bristle Blaster
Use the Electric Bristle Blaster where mains power is at hand and you need to remove corrosion and create an anchor profile in a single step. The bristle tips strike the surface with kinetic energy comparable to standard grit blast processes, making it a fit for spot repairs and coating preparation without setting up blast media.
- 1One-step clean and profileIt removes corrosion and generates the anchor profile at the same time, so a coating crew can prepare and recoat without a separate profiling stage.
- 2Cuts labour by 60%Fast, easy operation cuts labour by more than 60 percent, which matters on repair work where setup and dwell time drive the cost.
- 3Low vibration handlingNo vibration or jumping reduces operator fatigue, helping an applicator hold the tool steady through a longer shift.
Lower-budget alternatives
Ten minutes on a call with one of our specialists usually saves you from buying the wrong instrument.
Book a 10-minute callOr , our product assistant, for an instant answer.
Specifications
Specifications
- Voltage / Frequency version
- 230 V / 50 Hz
- Length
- 400 mm
- Height (incl. handle)
- 180 mm
- Width
- 100 mm
- Weight
- 2.2 kg
- Belt diameter (outer)
- 110 mm
- Output, maximal
- 700 W
- Output, nominal
- 480 W
- Idle speed (±5%)
- 3,200 rpm
- Vibration
- 2.8 m/sec2
- Sound pressure level
- 83 dB(A)
Downloads
Videos
Videos
Frequently asked questions
What does Bristle Blasting technology do to a corroded surface?
Bristle Blasting simultaneously removes corrosion and generates an anchor profile. The bristle tips strike the corroded surface with kinetic energy equivalent to standard grit blast media processes.
What power supply does the electric Bristle Blaster require?
The electric Bristle Blaster runs on 230V at 50Hz. It delivers an output of 700W at an idle speed of 3,200 rpm (plus or minus 5%).
What are the sound and vibration levels for the electric Bristle Blaster?
The electric Bristle Blaster produces a sound pressure level of 83 dB(A) and a vibration level of 2.8 m/sec squared. It weighs 2.2kg.
Quote on the MontiPower Electric Bristle Blaster by close of business.
Tell us about your application and we will send a quote with lead time and accessories.
Not sure this is the right model for your job? for a quick recommendation.
Request a quote
Request a quote
Tell us about your application and we will send a quote with lead time and accessories.