Product Description

The Affri 3001 Shore A Hardness Tester, tests by using a point that penetrates the material under spring pressure, with variable force depending on the model. A direct reading is displayed on the dial which is graduated from 0 to 100 Shore Hardness Units.

Features of the Affri 3001 Shore A Hardness Tester

Slim measuring nose to ensure exact measurement, as well as on small components. Suitable for tires, soft flexible rubber, plastic, PVC, polyester, neoprene, leather, Thiokol & Nitrile rubbers, medical components, paper, sponge, etc. using Shore A, B, C, D, O, OO, E, M, 000, 000-S scales. Optional clamping system to apply constant and vertical pressure on all test pieces, also on curved surfaces assuring accurate results. The tester can be installed on the relative bench support for laboratory purposes.

With tungsten tip which outlasts hardened steel up to ten times.

Analog
3001 Shore A Soft, flexible rubber, plastic, PVC, polyester, neoprene, leather, Thiokol & Nitrile rubbers, tyres
3011 Shore B Same as A scale for high values
3004 Shore C Same as D scale for low values
3002 Shore D Scale for hard and rigid surfaces synthetic materials, acrylics, plexiglass,
3010 Shore DO Same as B and C
3009 Shore O Same as A scale for low values
3008 Shore OO For sponges, natural rubber, silicone
3013 Shore E ASTM D 2240 – 02 a
3014 Shore M ASTM D 2240 – 02 a
3015 Shore 000 ASTM D 2240 – 02 a
3016 Shore 000-S ASTM D 2240 – 02 a

 

The Affri 3001 Shore A Hardness Tester can work in accordance with:
• ISO R.868
• ASTM 2240
• DIN 53505
• JIS K7215

Specifications

Affri Shore A 3001 Portable Hardness Tester Durometer – Specifications

SHORE (ISO 7619 / ASTM E2240)
Shore A ASTM E2240 / ISO 7619 Frustum 35° Soft surfaces, flexible rubber, natural rubber, plastic, PVC, polyester, neoprene, leather, nitrile rubbers, tyres, etc
Shore D ASTM E2240 / ISO 7619 Cone 30° Hard and rigid surfaces, ceramic and composites, acrylics, plexiglass, print rolls, cellulose, acetates, nylon, etc
Shore B ASTM E2240 Cone 30° Medium values. As A scale for higher values.
Shore C ASTM E2240 Frustum 35° Medium-hard values. As D scale for lower values.
Shore DO ASTM E2240 Ball 1.2 mm From medium-hard to hard values. As B and C.
Shore O ASTM E2240 Ball 1.2 mm Low values and very flexible materials. As A scale for low values.
Shore OO ASTM E2240 Ball 1.2 mm Very soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon
Shore E ASTM E2240 Ball 2.5 mm Very soft rubbers, natural rubber, elastomers, casting resin, soft PVC, leather, etc.
Shore M ASTM E2240 Cone 30° As A scale, for thin specimens and elastomer materials.
Shore 000 ASTM E2240 Ball 6.35 mm Ultra-soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon.
Shore 000-S ASTM E2240 Ball 10.7 mm Ultra-soft rubbers, viscoelastic polymers.

Data Sheet

Affri Shore A 3001 Portable Hardness Tester Durometer – Data Sheet

Affri Shore A 3001 Portable Hardness Tester Durometer Data Sheet

Standards

Affri Shore A 3001 Portable Hardness Tester Durometer – Standards

The Affri 3001 Shore A Hardness Tester can work in accordance with:
• ISO R.868
• ASTM 2240
• DIN 53505
• JIS K7215

Instruction Manual

Affri Shore A 3001 Portable Hardness Tester Durometer – Instruction Manual

Affri Shore A 3001 Portable Hardness Tester Durometer – Instruction Manual