Product Description
Features
User Friendly
Accurate
Reliable
Tough
Efficient
Powerful
|
Specifications
Elcometer 130 Salt Contamination Meter – Specifications
Product Features |
• Standard | ◊ Optional | ||
Model S | Model T | |||
Repeatable & reproducible measurements | • | • | ||
Easy to use menu structure; in 30+ languages | • | • | ||
Tough, impact, waterproof & dust resistant; equivalent to IP64 | • | • | ||
Bright colour screen; with permanent back light | • | • | ||
Scratch & solvent resistant display; 2.4” (6cm) TFT | • | • | ||
2 year gauge warranty | • | • | ||
USB power supply; via PC | • | • | ||
Calibration certificate | • | • | ||
Calibration verification mode (with optional certified calibration tiles) | • | • | ||
Ambient light sensor; with adjustable auto brightness | • | • | ||
Emergency light mode | • | • | ||
Magnetic & tripod mounting points | • | • | ||
Automatic paper size detection (full, half & quarter size) | • | • | ||
Gauge software updates; via ElcoMaster™ 2.0 software | • | • | ||
Data output | USB | USB & Bluetooth® | ||
On screen statistics | • | |||
Number of readings, η; | • | |||
Mean (average), x ; | • | |||
Standard deviation, σ; | • | |||
Highest reading,hi; | • | |||
Lowest reading, lo; | • | |||
Coefficient of variation, COV; | • | |||
Number of readings above high limit | • | |||
Gauge memory | • | |||
Number of readings | 150,000 | |||
Number of batches | 2,500 | |||
Measurement units & range | µg/cm² | 0-25 | 0-50 | |
ppm | 0-3000 | |||
µS/cm | 0-6000 | |||
mS/cm | 0-6m | |||
% Salinity | 0-0.3 | |||
mg/m² | 0-500 | |||
Measurement mode | • | |||
Surface cleanliness | • | • | ||
Conductivity | • | |||
Calibration offset mode | • | |||
Automatic temperature compensation | • | |||
ElcoMaster™ 2.0 software & USB cable | ◊ | • | ||
Individual reading stored with date, time, temperature and paper size | • | |||
Plastic transit case | • | • | ||
Alpha-numeric batch names; user definable on the gauge | • | |||
Fixed batch size mode; with batch linking | • | |||
Delete last reading | • | |||
Limits; user definable audible & visual pass/fail warnings | • | |||
Review, copy, clear & delete batches & calibration settings | • | |||
Trend graph; last 20 readings | • | |||
Batch review graph | • | |||
Analogue bar graph | • |
Technical Specifications
Model S | Model T | Description | |
E130-S | E130-T | Elcometer 130 Salt Contamination Meter | |
E130-SC | E130-TC | Elcometer 130 Certified Salt Contamination Meter | |
Model S | Model T | ||
Measurement Range | 0-25μg/cm² | 0-50μg/cm²; 0-500mg/m²; 0-6000μS/cm; | |
0-6mS/cm; 0-3000ppm; 0-0.3% Salinity | |||
Resolution | 0-10μg/cm² | 0.1μg/cm² | 0.1μg/cm² |
10-25μg/cm² | 0.2μg/cm² | 0.2μg/cm² | |
25+μg/cm² | 0.5μg/cm² | ||
Measurement Accuracy | ±1% of reading ±0.1μg/cm² | ||
Operating Range | 5°C – 50°C | ||
Power Supply | 4 x AA dry cell batteries (rechargeable batteries can also be used), or recharge via USB | ||
Number of Tests | Approximately 4,000 measurements before recharge | ||
Sample Time | 2 minutes | ||
Sampling Size | 100mm circle, or part of | ||
Dimensions | 250 x 145 x 50mm | ||
Weight | 780g |
The Elcometer 130 Salt Contamination Meter Packing List :
- Elcometer 130 Salt Contamination Meter
- 100 x high purity test papers
- 250ml (8.5fl oz) pure water
- 20 x PVC storage bags
- disposable gloves
- sensor wipes
- 3 x 2.5ml syringes
- 2 x plastic tweezers
- 4 x AA batteries
- shoulder strap
- carry case
- test certificate
- operating instructions
- USB cable (T)
- ElcoMaster™ 2.0 software (T)
Data Sheet
Elcometer 130 Salt Contamination Meter – Data Sheet
Elcometer 130 Salt Contamination Meter Data Sheet
Standards
Elcometer 130 Salt Contamination Meter – Standards
The Elcometer 130 Salt Contamination Meter conforms to :
- SSPC Guide 15
Accessories
Elcometer 130 Salt Contamination Meter – Accessories
Part Number | Description |
T13023980 | Calibration Verification Tiles, Set of 3 |
T13024091 | 2.5ml Syringe (x3) |
T99922341 | Pack of 10 Display Screen Protectors |
T13024093 | Box of 20 Self Seal Polythene Bags |
T99911344 | Pure Water – 250ml Bottle |
T13024094 | Box of 100 High Purity Test Papers |
T13024092 | Box of 20 Disposable Vinyl Gloves |
T13024098 | Plastic Tweezers (x2) |
T13024087 | Box of 72 Sensor Wipes |
T99921325 | USB Cable |
How To Use
How to use a Salt Contamination Meter
![]() |
Fill the syringe with 1.6 ml of high purity water. |
Note: Non-pure water (up to 2µg/cm²) can be automatically offset with the gauge. | |
![]() |
Eject the 1.6ml on to a clean unused sample paper, taking care to retain all the water on the paper. |
![]() |
Place wetted paper on to the area under test, pressing firmly into contours and irregularities to remove any entrapped air. |
Start the timer on the gauge. Whilst waiting for the sample time to elapse, additional tests can be prepared. | |
![]() |
After 2 minutes, remove the paper from the surface and place it on to the gold-plated electrodes. |
![]() |
Close the lid, ensuring that the magnetic catch is fully engaged. |
The reading will automatically be displayed and stored into memory together with paper size, temperature, date and time. | |
![]() |
Half size or quarter size papers can be used for testing on small surfaces. |
Paper size is automatically detected by the Elcometer 130 and the reading calculated automatically. | |