
The MontiPower Tercoo Strip and Prep Electric Set, part number SE-1401 (230V), is an integrated surface preparation system that combines heavy coating and corrosion removal with anchor profile activation on one drive unit. It addresses a two-part problem: thick old coatings, tar and corrosion must be stripped before a profile can be created, and doing both with the same machine reduces tool inventory and capital outlay. One drive unit powers two preparation steps, with changeover from the stripping discs to bristle blasting in around 30 seconds.
In the first step, flexible SBR Tercoo discs fitted with tungsten carbide pins use centrifugal force to drive the pins into the surface in a controlled pendulum motion. The hammering impact removes old paint, bitumen, epoxy, rust and corrosion without generating heat, handling coatings up to 5mm thick and working on steel, concrete, bitumen and rubber. Doing this heavy removal first extends the life of the bristle blaster belts used in the second step. The second step then prepares and activates the surface to a uniform profile.
The MontiPower Tercoo Strip & Prep Electric Set conforms to a recognised set of cleanliness and profile standards: ISO 8501-1 Sa 3, SSPC SP-5 and NACE 1 for white metal cleanliness after pre-blasting, ISO 8503 for surface profile, and ISO 8501-1 Sa 2 1/2 to Sa 3 after bristle blasting, which together specify how clean and how textured the steel must be before coating. It draws 910W, weighs about 3.8kg, runs at about 2,300 rpm with a 4,000 rpm maximum, and uses 126mm tungsten carbide pinned discs of 1500 HV hardness. Used in heavy-duty corrosion and coatings work, and supplied by BAMR, South Africa's authorised distributor.
MontiPower Tercoo Strip & Prep Electric Set
MontiPower delivers a complete, integrated solution for heavy coating and corrosion removal. From initial pre-blasting with Tercoo® discs to final Bristle Blasting, the system ensures every stage works in perfect harmony.
- One Machine, Two Options One drive unit powers two preparation steps, reducing equipment investment and simplifying your tool inventory.
- High Productivity Removes coatings up to 5 mm thick with ease, dramatically reducing preparation time on heavy-duty projects.
- Bristle Blaster Belt Extension & Savings Extends the life of your Bristle Blaster belts by handling the heavy thick tough coating removal first.
- Safe on All Surfaces Effective on steel, concrete, bitumen, and rubber.
- Fast Changeover Swap from stripping set of discs to Bristle Blasting on one machine with ease in 30 seconds
Specifications
- Part Number
- SE-1401 (230V)
- Power
- 910W
- Weight
- ca. 3,8 kg
- Speed Range
- ca. 2.300 rpm
- Cable Length
- ca. 3,6 m
- Disc Diameter
- 126 mm ± 0,8 mm
- Disc Thickness
- 6,7 mm ± 0.3 mm
- Shaft Size
- 8 mm hex
- Rubber Hardness
- 50 Shore A
- Pin Material
- Tungsten Carbide
- Pin Hardness
- 1500 HV
- Recommended Speed
- 2.300 rpm
- Maximum Speed
- 4,000 rpm
Specifications
Specifications
- Part Number
- SE-1401 (230V)
- Power
- 910W
- Weight
- ca. 3,8 kg
- Speed Range
- ca. 2.300 rpm
- Cable Length
- ca. 3,6 m
- Disc Diameter
- 126 mm ± 0,8 mm
- Disc Thickness
- 6,7 mm ± 0.3 mm
- Shaft Size
- 8 mm hex
- Rubber Hardness
- 50 Shore A
- Pin Material
- Tungsten Carbide
- Pin Hardness
- 1500 HV
- Recommended Speed
- 2.300 rpm
- Maximum Speed
- 4,000 rpm
What's in the kit
What's in the kit
Standards
Standards
Downloads
Videos
Videos
Frequently asked questions
What disc size and shaft does the SE-1401 accept?
The SE-1401 accepts a 126 mm diameter disc (±0.8 mm), 6.7 mm thickness (±0.3 mm) with an 8 mm hex shaft. Confirm compatibility with your existing setup before ordering.
Why tungsten carbide for the Tercoo pins?
Tungsten carbide (1500 HV hardness) resists wear far better than softer materials during heavy coating and corrosion removal. It extends disc life significantly in high-demand blasting work.
What speed should I use for different coatings?
The SE-1401 runs at a recommended 2,300 rpm, with a maximum of 4,000 rpm. Tailor your speed to the coating type and substrate to optimise removal rate without substrate damage.
Is the SE-1401 portable for site prep work?
Yes. At 3.8 kg with a 3.6 metre cable, the SE-1401 is designed for portable use. Power requirement is 910W at 230V single-phase.
Can the MontiPower handle the complete prep cycle?
Yes. The MontiPower integrates Tercoo disc pre-blasting through to final Bristle Blasting in one system, eliminating the need to swap equipment between stages.
Quote on the MontiPower Tercoo Strip & Prep Electric Set by close of business.
Tell us about your application and we will send a quote with lead time and accessories.
Not sure this is the right model for your job? for a quick recommendation.
Request a quote
Request a quote
Tell us about your application and we will send a quote with lead time and accessories.
Shop online