Product Description

The Elcometer 141 Paint Inspection Gauge (P.I.G.) provides a useful method for determining the paint thickness of both single and multiple layer coatings.
The Paint Inspection Gauge is ideal for use on metallic & non-metallic substrates such as wood, glass and plastics.
The Elcometer 141 Paint Inspection Gauge (PIG) can be used in accordance with:
Standards not in bold have been superseded but are still recognised in some industries. |
Specifications
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) – Specifications
Part Number | Description |
A141—D | Elcometer 141 Paint Inspetcion Gauge |
Scale Range (maximum) | 0 to 1.8mm |
Scale Resolution | 0.02mm |
Dimensions | 160 x 100 x 35mm |
(fitted to handle) | |
Weight | 510g |
(fitted to handle) | |
Certificate available | Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability |
Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory |
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) Packing List:
- Elcometer 141 P.I.G
- x50 microscope
- 3 cutters
- marker pen
- hexagonal wrench
- carry case
- operating instructions
Data Sheet
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) – Data Sheet
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) Data Sheet
Standards
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) – Standards
The Elcometer 141 Paint Inspection Gauge (PIG) can be used in accordance with:
- ISO 2808-6B
- ISO 2808-5B
- AS 1580.108.2
- ASTM D 4138-A
- BS 3900-C5-5B
- DIN 50986
- NF T 30-123
Standards not in bold have been superseded but are still recognised in some industries.
Accessories
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) – Accessories
Part Number | Description | Cutting Angle | Measurement Range | Graticule Scale Factor |
T99915761-1 | Tungsten Carbide Cutter No 1 | 45° | 20 – 2000mic | 20mic |
T99915761-4 | Tungsten Carbide Cutter No 4 | 26.6° | 10 – 1000mic | 10mic |
T99915761-6 | Tungsten Carbide Cutter No 6 | 5.7° | 2 – 200mic | 2mic |
Instruction Manual
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) – Instruction Manual
Elcometer 141 Paint Inspection Gauge (PIG) (2 models in 1) Instruction Manual